2700 K
- rectangular 2,7 m
- walk-in cold store
- rear draft counter
- 3 open-up flaps

Ihr Ansprechpartner
Christian J. Nichts
Tel: +49 (0) 6500 / 9141-30
Fax: +49 (0) 6500 / 9141-81
Mobil: +49 (0) 171 7985583
christian.nichts@peki.com
Technical data
Handling | |
time for opening/closing / 1 person app. | 5 min. |
Weights | |
permitted gross vehicle weight max. | 1.300 kg |
net weight of basic model app. | 950 kg |
payload of basic model app. | 350 kg |
Measurements | |
ready-to-drive app. |
3.960 x 2.060 x 2.600 mm |
interior sales area app. |
1.820 x 2.000 mm |
interior standing height app. | 2.100 mm |
covered sales-area |
3.950 x 4.660 mm |
interior cold store app. | 810 x 1.820 x 2.000 mm |
counter length app. |
7.400 mm |
draft counter app. |
1.800 x 700 mm |
Storage capacity cold store (stationary mode) | |
f. e. max. 8 (16) x 50 l KEG (2 layers) |
Standard features i.a.
- hot galvanized steel chassis
- straight V-drawbar with EU standard ball coupler
- standard axle with single tyres 195/50 B 10
- EU standrd overrunning and parking brake
- 12 V exterior ligthing according
- connecting cable with 13 pin plug ISO 11446
- reinforced jockey wheel and support legs
- PEKI AluStar all-aluminium profile floor
- body made out of insulated sandwich panels
- completely bordered with aluminium profiles
- cold store made of 50 mm insulated sandwich panels
- aluminium floor and KEG protection rails
- insulated entrance door in the front wall
- insulated connecting door to sales area
- 230 V 50 Hz cooling machine outside at the front wall
- temperature cold store app. +6°C
- PEKI all-aluminium system roof frame
- insulated sandwich roof panel
- open-up flaps on 3 sides (sides and rear)
- flaps made out of insulated sandwich panels
- foldable guest counters on the sides
- two-step rear draft counter
- optimum working and guest heights
- foldable guest counter at the rear
- all foldable counters in rounded design
- stainless steel rear draft counter
- pressed-in wet area, drip tray and sink
- 230 V 16 A electric basic installation (German standard)
- water supply for external fresh and used water
- PVC corner covers between sales flaps
Roof variants
- flat roof (standard)
- arched roof
Overseas shipping
- trailer fits in high cube ISO container (flat roof only)

Ihr Ansprechpartner
Christian J. Nichts
Tel: +49 (0) 6500 / 9141-30
Fax: +49 (0) 6500 / 9141-81
Mobil: +49 (0) 171 7985583
christian.nichts@peki.com

Ihr Ansprechpartner
Christian J. Nichts
Tel: +49 (0) 6500 / 9141-30
Fax: +49 (0) 6500 / 9141-81
Mobil: +49 (0) 171 7985583
christian.nichts@peki.com
Peki GmbH
Am Neuhaus 2
DE-54317 Osburg/Trier
Phone: +49 (0) 6500 / 9141-0 · Fax: +49 (0) 6500 / 9141-83 · E-Mail: info@peki.com